{ "currentVersion": 10.81, "cimVersion": "2.6.0", "serviceDescription": "Streams: This service shows the approximate centerline of known streams in the city. Streams may exist where none are shown. \n\nWetlands: This map is intended to show the approximate location of known wetlands within the City of Mukilteo and is meant only as a general guide. The location and extent of wetlands are determined on a lot-by-lot, project-by-project basis, and if a wetland is not shown on the inventory map, that does not necessarily mean wetlands do not occur on the lot. The city will update the wetland inventory map as wetlands are mapped in the field and submitted by applicants to the city.\n\nGeotech Report Zones: This service displays the areas where a geotechnical report is required. This data is approximate and only meant as a general guide. This data was developed with help from a by a geotechnical engineering consultant in 2005. Factors taken into account were: Liquefaction, Landslide Hazard Areas (Moderate, High, and Very High), Known Landslides, Whidbey Fault Lines, and Soil Types. \n\nFlood Hazard Areas: The City of Mukilteo uses data from the Federal Emergency Management Agency (FEMA) to establish flood hazard areas. All development proposals in special flood hazard areas shall be subject to the provisions of Chapter 15.12, Flood Damage Prevention.", "mapName": "Critical Areas", "description": "Streams: This service shows the approximate centerline of known streams in the city. Streams may exist where none are shown. \n\nWetlands: This map is intended to show the approximate location of known wetlands within the City of Mukilteo and is meant only as a general guide. The location and extent of wetlands are determined on a lot-by-lot, project-by-project basis, and if a wetland is not shown on the inventory map, that does not necessarily mean wetlands do not occur on the lot. The city will update the wetland inventory map as wetlands are mapped in the field and submitted by applicants to the city.\n\nGeotech Report Zones: This service displays the areas where a geotechnical report is required. This data is approximate and only meant as a general guide. This data was developed with help from a by a geotechnical engineering consultant in 2005. Factors taken into account were: Liquefaction, Landslide Hazard Areas (Moderate, High, and Very High), Known Landslides, Whidbey Fault Lines, and Soil Types. \n\nFlood Hazard Areas: The City of Mukilteo uses data from the Federal Emergency Management Agency (FEMA) to establish flood hazard areas. All development proposals in special flood hazard areas shall be subject to the provisions of Chapter 15.12, Flood Damage Prevention.", "copyrightText": "City of Mukilteo GIS", "supportsDynamicLayers": true, "layers": [ { "id": 25, "name": "Official Data", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": [ 26, 22, 27, 28, 29, 5, 6, 7 ], "minScale": 0, "maxScale": 0, "type": "Group Layer", "supportsDynamicLegends": false }, { "id": 26, "name": "Geotech Report Zones", "parentLayerId": 25, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon", "supportsDynamicLegends": true }, { "id": 22, "name": "Slope Contours", "parentLayerId": 25, "defaultVisibility": false, "subLayerIds": [ 24, 23 ], "minScale": 0, "maxScale": 0, "type": "Group Layer", "supportsDynamicLegends": false }, { "id": 24, "name": "5 ft Contours (brown)", "parentLayerId": 22, "defaultVisibility": true, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolyline", "supportsDynamicLegends": true }, { "id": 23, "name": "5 ft Contours (white)", "parentLayerId": 22, "defaultVisibility": true, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolyline", "supportsDynamicLegends": true }, { "id": 27, "name": "Streams", "parentLayerId": 25, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolyline", "supportsDynamicLegends": true }, { "id": 28, "name": "Stream Buffers", "parentLayerId": 25, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon", "supportsDynamicLegends": true }, { "id": 29, "name": "Wetlands", "parentLayerId": 25, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon", "supportsDynamicLegends": true }, { "id": 5, "name": "Flood Hazard Areas - 2020", "parentLayerId": 25, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon", "supportsDynamicLegends": true }, { "id": 6, "name": "Flood Hazard Areas - 1999", "parentLayerId": 25, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon", "supportsDynamicLegends": true }, { "id": 7, "name": "PAU Basins", "parentLayerId": 25, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon", "supportsDynamicLegends": true }, { "id": 8, "name": "Supporting Data", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": [ 9, 10, 11, 12, 13, 16, 14, 15 ], "minScale": 0, "maxScale": 0, "type": "Group Layer", "supportsDynamicLegends": false }, { "id": 9, "name": "Active Faults (WADNR)", "parentLayerId": 8, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolyline", "supportsDynamicLegends": true }, { "id": 10, "name": "LiDAR Indicated Steep Slopes", "parentLayerId": 8, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon", "supportsDynamicLegends": true }, { "id": 11, "name": "Landslide Hazard Areas", "parentLayerId": 8, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon", "supportsDynamicLegends": true }, { "id": 12, "name": "Liquefaction Susceptability (WADNR)", "parentLayerId": 8, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon", "supportsDynamicLegends": true }, { "id": 13, "name": "Soils", "parentLayerId": 8, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon", "supportsDynamicLegends": true }, { "id": 16, "name": "WA Landslide Inventory 2022", "parentLayerId": 8, "defaultVisibility": false, "subLayerIds": [ 0, 1, 2, 3, 4 ], "minScale": 0, "maxScale": 0, "type": "Group Layer", "supportsDynamicLegends": false }, { "id": 0, "name": "Recent_Landslides", "parentLayerId": 16, "defaultVisibility": true, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPoint", "supportsDynamicLegends": true }, { "id": 1, "name": "Scarps", "parentLayerId": 16, "defaultVisibility": true, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolyline", "supportsDynamicLegends": true }, { "id": 2, "name": "Landslide_Compilation", "parentLayerId": 16, "defaultVisibility": true, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon", "supportsDynamicLegends": true }, { "id": 3, "name": "Scarps_and_Flanks", "parentLayerId": 16, "defaultVisibility": true, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon", "supportsDynamicLegends": true }, { "id": 4, "name": "Landslide_Deposits", "parentLayerId": 16, "defaultVisibility": true, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon", "supportsDynamicLegends": true }, { "id": 14, "name": "Wetland or Stream Report\\Survey", "parentLayerId": 8, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon", "supportsDynamicLegends": true }, { "id": 15, "name": "Wetlands", "parentLayerId": 8, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon", "supportsDynamicLegends": true } ], "tables": [], "spatialReference": { "wkid": 102748, "latestWkid": 2285, "xyTolerance": 0.003280833333333333, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -117104300, "falseY": -99539600, "xyUnits": 3048.0060960121928, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 }, "singleFusedMapCache": false, "initialExtent": { "xmin": 1242120.5829381682, "ymin": 330181.98151711107, "xmax": 1354792.3601290858, "ymax": 372830.8958363577, "spatialReference": { "wkid": 102748, "latestWkid": 2285, "xyTolerance": 0.003280833333333333, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -117104300, "falseY": -99539600, "xyUnits": 3048.0060960121928, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 } }, "fullExtent": { "xmin": 129024.23596654832, "ymin": -536261.0923756957, "xmax": 2587379.7198363096, "ymax": 751798.4640459716, "spatialReference": { "wkid": 102748, "latestWkid": 2285, "xyTolerance": 0.003280833333333333, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -117104300, "falseY": -99539600, "xyUnits": 3048.0060960121928, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 } }, "minScale": 0, "maxScale": 0, "units": "esriFeet", "supportedImageFormatTypes": "PNG32,PNG24,PNG,JPG,DIB,TIFF,EMF,PS,PDF,GIF,SVG,SVGZ,BMP", "documentInfo": { "Title": "Untitled.aprx", "Author": "", "Comments": "Streams: This service shows the approximate centerline of known streams in the city. Streams may exist where none are shown. \n\nWetlands: This map is intended to show the approximate location of known wetlands within the City of Mukilteo and is meant only as a general guide. The location and extent of wetlands are determined on a lot-by-lot, project-by-project basis, and if a wetland is not shown on the inventory map, that does not necessarily mean wetlands do not occur on the lot. The city will update the wetland inventory map as wetlands are mapped in the field and submitted by applicants to the city.\n\nGeotech Report Zones: This service displays the areas where a geotechnical report is required. This data is approximate and only meant as a general guide. This data was developed with help from a by a geotechnical engineering consultant in 2005. Factors taken into account were: Liquefaction, Landslide Hazard Areas (Moderate, High, and Very High), Known Landslides, Whidbey Fault Lines, and Soil Types. \n\nFlood Hazard Areas: The City of Mukilteo uses data from the Federal Emergency Management Agency (FEMA) to establish flood hazard areas. All development proposals in special flood hazard areas shall be subject to the provisions of Chapter 15.12, Flood Damage Prevention.", "Subject": "A feature service showing the 4 primary types of critical areas in the City of Mukilteo: Streams, Wetlands, Geologically Sensitive Areas, and Flood Hazard Areas.", "Category": "", "AntialiasingMode": "Fast", "TextAntialiasingMode": "Force", "Keywords": "Critical Areas" }, "capabilities": "Query,Map,Data", "supportedQueryFormats": "JSON, geoJSON, PBF", "exportTilesAllowed": false, "referenceScale": 0.0, "datumTransformations": [ { "geoTransforms": [ { "wkid": 8088, "latestWkid": 1188, "transformForward": true, "name": "NAD_1983_To_WGS_1984_1" } ] }, { "geoTransforms": [ { "wkid": 8088, "latestWkid": 1188, "transformForward": false, "name": "NAD_1983_To_WGS_1984_1" } ] } ], "supportsDatumTransformation": true, "archivingInfo": {"supportsHistoricMoment": false}, "supportsClipping": true, "supportsSpatialFilter": true, "supportsQueryDataElements": true, "maxRecordCount": 1000, "maxImageHeight": 4096, "maxImageWidth": 4096, "supportedExtensions": "" }